
- MAX Power 160W
- Wired Remote Controller
- ACTIVE EQ TECHNOLOGY Switch
- Class D Amplifier
- (W)280mm x (H)70mm x (D)200mm
| AMPLIFIER | ||
|---|---|---|
| Class D | ● | |
| Maximum Output Power (W) | 160W | |
| Signal to Noise Ratio (1ohm at 14.4V) | 90dB | |
| Input Impedance | RCA 22k ohm | |
| Speaker 10k ohm | ||
| Sensitivity | RCA Voltage 20mV | |
| Speaker Voltage 0.4V | ||
| Signal Sensing Turn On(Speaker Level Input) | ● | |
| Automatic input swiching (Speaker Level or RCA) | ● | |
| Fuse(Battery Cord) | 10A | |
| Operating Voltage | DC 14.4V (11V~16V) | |
| Maximum Current Consumption | 5.9A | |
| SPEAKER(SYSTEM) | ||
| Woofer Size | 20 x 13cm | |
| Cap Material | Aluminum | |
| Surround Material | Urethane | |
| Impedance | 1Ω | |
| Frequency Response | 40Hz-200Hz(-15dB) | |
| Sensitivity | 89dB | |
| Audio Section(Wired Remote Controller) | ||
| Gain Control (VOLUME) Variable | -∞ - 0dB | |
| Low-Pass Filter (FREQUENCY) Variable | 50Hz - 125Hz, -18dB/oct | |
| Phase Control (PHASE) Switched | 0° - 180° | |
| ACTIVE EQ TECHINOLOGY | HEAVY | |
| TIGHT | ||
| FLAT(w/o HEAVY/TIGHT effect mode.) | ||
| DIMENSION / WEIGHT | ||
| Width | 280mm | |
| Height | 70mm | |
| Depth | 200mm | |
| WEIGHT | 2.6kg | |
| ACCESSORY | ||
| ・Cables w/ Connector | ||
| Battery Cord | 5.0m | 18AWG |
| Battery Fuse | 10A | |
| GND | 1.5m | 18AWG |
| RCAInput (Female) | 0.7m | |
| P-CON | 5.0m | 20AWG |
| ・Cables w/ Connector | ||
| Speaker Level Input (SP) with RCA (Male) | 4.3m | 18AWG |
| ・Remote Controller (Wired) | 5.0m | |
| ・Mounting Bracket | 2pcs | |
| ・Cord Crump | 1pc | |
| ・Screw | ||
| Tapping Screw for Bracket | 2pcs | Φ5 x 16mm |
| Tapping Screw between Under Case and Bracket | 2pcs | Φ5 x 12mm |
| Tapping Screw for Cord Cramp | 2pcs | Φ3 x 10mm |
| ・Double-faced tape for Wired Remote Controller | 1pc | |
| ・Warranty Card | 1pc | |
| ・Instruction Manual | 4pcs | |