
Package included:
- DIECI POWER 1180W 1 CHANNEL AMPLIFIER (DP 1.500)
- Channels: 1
- Power supply voltage: 11 - 15 VDC
- Idling current (power ON/OFF): 1 A
- Consumption at 2 Ohm, 14.4 VDC (Max Musical Power): 21 A
- Remote In: 4-15 VDC - 1 mA
- Distortion - THD (100Hz at 4 Ohm): 0.2 percent
- Bandwidth: 10 - 500 Hz
- S/N Ratio (A weighted at 1V): 99 dB
- Damping factor (100Hz at 4Ohm): 180
- Pre-ln sensitivity: 0.32-8VRMS
- Load impedance (MIN): 2 Ohm
- Size: 190 x 190 x 50mm
- Weight: 1.62 kg
- Adjustable Crossovers: Yes
- Output Power (RMS) at 14.4 VDC, THD 1 Percent:
- 1Ch: 280 x 1 (4 Ohm)
- 1Ch: 500 x 1 (2 Ohm)
- Total Power RMS: 1180W
- Inputs and Filters:
- Inputs: Pre in and Speaker in
- Pre out full range: Yes
- Filters Full: Yes
- Notes: Compatible bass controller is HRC 02 (Sold Separately)
- DIECI 12" 1000W 4 OHM DVC SUBWOOFER (DS 30.3) + Aerpro subwoofer Sealed Box
- Size: 300mm (12")
- Power Handling
- Continuous: 250W
- Peak: 1000W
- Impedance Ohm: 4
- Voice Coil: 38mm (1.5")
- Frequency Response: 28-300
- Magnet Size (D x d x h): 115 x 50 x 25mm (4.5 x 2 x 1")
- Component Weight: 4kg
- Magnet: High Density Flux Ferrite
- Cone: Polypropylene with Mica injection
- Depth: 120mm (4.7")
- Voice Coil Type: Dual
- Xmech: +/- 9mm (0.59")
- Notes: Optional Grille available model number DSG3003
- MAXCOR 8AWG 2-CHANNEL AMP INSTALL KIT
- 6M Blue 8AWG Power Cable with O-Ring Terminal
- 0.8M White 8AWG Earth Cable
- 60A ANL Fuse With Holder
- 5M 2 Channel RCA Leads
- 4M 16AWG Speaker Cable
- 5M 20AWG Orange Trigger Wire
- Black Weaved Tubing Fitted to Power Cable
- Hex Key For Fuse Holder
- 8AWG Wiring Grommet
- Cable Ties
- All Required Terminals