HERTZ AUDIO CENTO 6.5" 2-WAY COMPONENT SYSTEM (FLAT PROFILE) - PAIR (CK 165 F)

Introducing the Hertz Cento CK 165 F (Order Code CK165F) 6.5" two way component flat profile speaker. The installation of aftermarket speakers in factory placements limited by a reduced depth is a recurring problem that forces specialists to make complicated mechanical changes, extending the time to finish the job significantly. The new Cento C165F flat profile woofer is the solution, thanks to a super slim basket with reduced depth that allows the use even in the most problematic OEM scenarios, widespread in new generation cars. The R&D team, through an extensive design process was able to obtain high performance even with the super slim basket feature. This was made possible by the optimization of the mobile group excursion and the new design of the cone and dust-cup geometry. Like the other components of the Cento range, the use of SPP-M (Semi-Pressed Paper-Mica) provides the C165F with a light and rigid cone at the same time that guarantees high efficiency and an extended frequency response.

• System: Component
• Size:
  • Woofer: 165mm (6.5")
  • Tweeter: 26mm (1")
• Power Handling:
  • Continuous: 90W
  • Peak: 270W
• Impedance: 4 Ohm
• Tweeter Diaphragm: 26mm (1")
• Woofer Voice Coil: 25mm (1")
• Tweeter Voice Coil: 20mm (0.8")
• Frequency Response: 65 - 22.5k Hz
• Woofer Magnet Size (D x d x h):
• Tweeter Magnet Size (D x h):
• Weight of One Woofer: 0.72 kg
• Weight of One Tweeter: 0.03 kg
• Woofer Magnet: High Density Flux Ferrite
• Tweeter Magnet: Neodymium
• Cone: Semi Pressed Paper-Mica
• Dome: Tetolon
• Notes: Includes Speaker Grilles

• Shallow profile for an easy replacement of factory speakers.
• Semi-Pressed Paper Cone reinforced with Mica powder for superior stiffness and smooth response.
• High-density flux ferrite magnet in the woofer combined with low-carbon polar plates for reduced distortion at high power levels.
• Pure copper voice coil, wound on aluminium former, for very good thermal and mechanical capacity.
• Soft Tetolon fiber 26 mm (1 in.) dome and 20 mm (0.8 in.) voice coil, for a natural and yet detailed reproduction of musical nuances.
• Neodymium magnet in the tweeter with high-density magnetic flux, optimized for maximum control during high-energy dynamic transients in the mid-high frequency range.
• Stylish grille designed combining metallic mesh and high resistance ABS frame.